GATE TITAN for V2 Gearbox - Advanced Firmware, Front Wired

£149.00
Price includes UK VAT.
Checking product availability...

This product is on display in our showroom.

Product info

  • Product ID: 24536
  • EAN: 5902020754176
Twitter Facebook

GATE Electronics TITAN V2 Advanced - Front Wired

TITAN V2 is an AEG Control System for Version 2 Gearboxes.

Transform your AEG into an advanced system. Adjust your AEG and check the Statistics using USB-Link and GATE Control Station App for PC, MAC and Android devices. The TITAN V2 has a whole new trigger sensor, which allows you to set a hair trigger with ludicrous precision: even 50 sensitivity levels for first millimetre of trigger movement. The innovative 3rd generation trigger sensor offers you even 460 possible sensitivity settings. Gain a unique tactical advantage thanks to the extremely fast trigger response and lots of other useful functions. Boost your AEG with computerized technology.

Here at Super5ives we offer a fitting service for GATE products into most AEG - talk to us about our Titan installation service today.

The TITAN V3 Advanced Features:

Gen 3 Trigger Sensor gives you the ability to set the trigger sensitivity with ludicrous precision: at least 50 sensitivity levels for first millimeter of trigger movement. Depending on trigger construction, it enables 420 possible sensitivity settings. You do not have to disassemble your AEG to do this either! Just use the GATE Control Station™ App and adjust the trigger to your preferences and level of skills.

Configurable Fire Selector - Two selector sensors allow you to use up to six fire selector modes, including innovative SEMI-BURST-AUTO mode:

  • SAFE-SEMI-AUTO

  • SAFE-SEMI-SEMI

  • SAFE-SEMI-BURST

  • SAFE-BURST-AUTO

  • SAFE-SEMI-BURST/AUTO (short press - BURST, long press - AUTO)

  • SEMI-BURST-AUTO (SAFE mode via the fast switch SAFE-SEMI-SAFE)

Gen 2 Cycle Detection, Thanks to the dual gear sensor, TITAN precisely detects in which position the cycle should finish - even in case of Infinite Torque-up gears. Therefore, even the shortest trigger action produces at least one full cycle.Thanks to the cycle detection function you get:

  • Automatic BURST – There is no need to set the burst time. You can set the burst amount between two and 10 shots;

  • Automatic PRE-COCKING – Pre-cocking is fully operational in SEMI, BURST and AUTO modes and there is no need to set the pre-cocking boost manually. You can simply set the pre-cocking as high, mid or low;

  • FULL CYCLE - When the Pre-cocking is off, TITAN ensures that the gearbox completes a full cycle. You gain a higher reliability.

Gen 2 Pre-Cocking, Thanks to PRE-COCKING, you gain a trigger reaction similar to a real gun. It allows for initial spring compression, which speeds up the trigger response significantly. There are two PRE-COCKING MODES:

  • AUTO MODE – The spring is automatically compressed after each shot,

  • MANUAL MODE – Set pre-cocking values yourself.

  • Three PRE-COCKING BOOST Options: HIGH / MID / LOW

*Now the pre-cocking is fully operational in SEMI, BURST and AUTO modes and there is no need to set the pre-cocking boost manually.

Gen 2 Bust Control enables you to shoot a pre-determined number of BBs, which is very useful in MILSLIM and when using low-caps.

* There is no need to set burst time. You can easily set burst between two and 10 shots.

Rate of Fire Control enables a reduction in a gun's rate of fire. Enabling you to use Higher Power Li-Po's without fear of Damaging your AEG.

Rate of Fire STAB Control allows you to change the way the ROF Control works:

  • ON - ROF Control uses PWM to decrease ROF. Thanks to this, gearbox works smoothly what decreases wear and tear of AEG internal parts.

  • OFF - ROF Control adds breaks between shots to decrease ROF. It gives you more realistic experience.

Sniper Delay lets you to set delay between each SEMI shots to simulate the delay from reload or recoil. You can set 0.5s, 1s, 2s or 3s delay.

Smart Trigger enables you to achieve a faster trigger response. Working with the ROF Control System. During the first shot, the microprocessor sets the ROF Control to 100%. After the first shot, it switches to a previously programmed value (e.g. 50%). As a result the first shot is fired at a full ROF, and subsequent shots at a reduced ROF. The best results can be achieved by using a battery with a higher than standard voltage. For example, if you use a 7.4V battery, you can replace it with 11.1V. In this way, you will achieve a faster trigger response with the same rate of fire as with a standard battery.

Works only when ROF STAB is ON.

AUG Mode! Enjoy two stage trigger. Activate AUG Mode and set two different trigger sensitivities. Pulling the trigger slightly produces SEMI or BURST fire and pulling the trigger further produces BURST or AUTO fire (depending on the fire selector mode).

Gen 2 Battery Protection against Over-Discharge of the Battery. Modern LiPo and LiFe batteries are very sensitive to over-discharge. If you do not want to damage the battery and you care about its service life, this protection is indispensable. The microprocessor monitors the battery voltage constantly. When the voltage drops down to a critical level, it will not allow firing.

*TITAN detects the number of cells automatically. There is no need to reprogram TITAN every time you replace the battery.

Smart Fuse, A combination of current, voltage and temperature measurements makes your AEG installation highly reliable. It protects the MOSFET against overheating, overloading and short-circuiting. If your AEG becomes jammed, the function protects the motor and battery against damage.

Adaptive Active Break, It automatically adjusts the motor's braking power according to your needs. This prolongs the lifespan of the motor. There is also an option to set the motor braking power manually.

Self Diagnostics allows you to quickly check whether the drop-in module is working properly. It helps to locate where the problem lies when anything goes wrong.

Protective Coating. Thanks to its special conformal coating, TITAN is resistant to atmospheric conditions (Military Specification MIL-V-173C).

What Comes in the Box:

  • GATE Electronics TITAN V2 Module with ADVANCED firmware, Front Wired.

  • USB-Link for GATE Control Station™ App

  • USB Cables:

a) USB-C to Micro-USB (0.6m / 1ft 11in)

b) Micro-USB to Micro-USB (0.6m / 1ft 11in)

  • Installation Kit

  • TITAN Patch

  • Quickstart Guides

Menu 0£0.00
Top